Producător: Ecosolaris
Cod produs: ECO-TRK18PV
Disponibilitate: Pre-comanda
Greutate(kg): 1200
Garanţie(ani): 2
Pret: 47.929,11 RON

Pretul afisat nu contine TVA

Include taxa de timbru verde.

Mai multe detalii
Pentru comenzi rapide:
E-mail: [email protected]
Telefon: +40 748141089

Tracker solar cu doua axe 30 m2 18 Panouri solare

Mechanical Capabilities
Number of turning axisDual-Axis
Hour Angle LimitAzimuth angle range, 350° slewing drive
Elevation angle5° to 90°
Type of hour-angle motorType of azimuth angle motor, slewing drive SD5M3
Type of elevation-angle motorType of elevation angle motor, Linear Motor SM4S900M3 with stroke of 900 mm
Hour-angle shaft diameter and length/
Turning speed of hour angle shaft/
Turning speed of elevation shaft/
Max. dynamic torque of the hour-angle shaft/
Max. dynamic torque of elevation shaft/
Destructive torque of the hour-angle shaft/
Destructive torque of elevation shaft/
Backstructure size5,5 x 5 m; for panel surface area 6 x 5 m (15 panels)
Type of backstructure clampToothed scissors gripers – 90 pcs
Tube diameter for mounting/
Max. dimensions of a solar panel15 pieces of 2 m x 1 m in total 30 m2
Max. weight of a solar panel15 pcs per 25 kg; total max. 375 kg
Estimated service lifeof motors, 800–1000h of motor operation (DC motor replace on 8 years if each day one cycle), backup battery replace on 3-5 years if battery in, all other 25 years; of tracker, 25 years
 
Positioning System Data
Tracking accuracyup to 0,1°
Operating ProtocolTdAPS (Time derived Astronomical Positioning System)
Type of Positioning SystemServo driver positioner with TdAPS arc logic function calc.
Type of positionerDin Rail positioner Nano-D or Micro-D and externor cables
Type of timerGMT clock with EOT and calendar
Type of application program for supervision and settingSolar tracking system monitor via Sigma web site or Helios analytics program
Setting and changing data via PCYes, via RS485 or Wireless ZigBee or via USB
Monitoring possibility via PCYes
Turned on the position sent from PCYes
Turning time intervalFrom 20 sec to 900 sec
 
Communication Data
Type of communication interfaceUSB interface for Micro-D; RS485 or Wireless ZigBee for Nano-D
Networking solution for control from centreRS485 or Wireless ZigBee for Nano-D
 
Firmware - Software
Upgrading possibility via PCYes, via USB with Helios Analytics or via RS485 at Sigma Web site or via Wireless ZigBee
 
Electrical Data
Motor Power Supply24 VDC ± 15% (5A current capacity) SMPS must have 150% inrush current
Backup batteryCR 1225 coin
Max. consumption during the operation of the hour-angle shaft/
Max. Current of elevation shaft/
Standby consumption (when is not moving)60 mA ± 30% @ 24VDC
Power supply connection1 piece of 2 Wire Cable with an Internal Cu Conductor of 2,5 mm2 (for lenghts up to 30 m),
Junction box190 (L) x 140 (W) x 70 (H) mm with connection harness
 
Environmental Data
Operating temperature– 25°C to +70°C (optionally with artic grease for teperatures from –40°C up to +70°C)
Operation at humidity0% to 100%, relative humidity
Max. safe wind speedWind parameters; max. wind speed in operating in any working position is 20 m/s, survival max. wind gust speed not operating (table is not in saffe wind position) is 30 m/s, survival max. wind gust speed in safe wind position - (horizontal) 50 m/s.
 
Corrosion, weather and chemical resistance
Neutral Salt Spray (3000 h, EN ISO 9227 NSS)/
Hot-dip galvanizing (HDG, EN ISO 1461)75–100 μm (equivalent of 50 years)
 
Packaging
Dimensions of a packed product1 box of 6100 (L) x 800 (W) x 1200 (H) mm (Wooden Box is not icluded with kit)
Product weight750 kg
 
Quality Certificates
International Protection Rating (IEC 60529)IP63
Electromagnetic Compatibility (EMC Directive 89/336/EEC)Yes
Low Voltage Equipment Directive (EEC Council Directive 73/23/EEC)Yes

Spune-ţi opinia

Autentifică-te sau Înregistrează un cont nou pentru a putea scie o opinie